Plate heat exchanger design software for industrial and educational applications
Bočna strana članka
Glavni sadržaj članka
Apstrakt
Plate heat exchanger is a type of heat exchanger that uses corrugated metal plates to transfer heat between two fluids. The plate corrugations are designed to achieve turbulence across the entire heat transfer area thus producing the highest possible heat transfer coefficients while allowing close temperature approaches. Subsequently, this leads to a smaller heat transfer area, smaller units and in some cases, fewer heat exchangers. In this work, an application for thermal and hydraulic computations of plate heat exchangers had been developed using Sharp Develop, an open source programming platform. During the development process, several literature methods and correlations for calculation of heat transfer coefficient and pressure drop in a plate heat exchanger have been tested and the selected four methods: Martin, VDI, Kumar and Coulson and Richardson have been incorporated into the software. The structure of the software is visually presented through several windows: a window for inserting input data, windows for showing the results of computation by each of the methods, a window for showing comparative analysis of the most important computation results obtained by all of the used methods and a help window for demonstrating the working principle of plate heat exchanger.
Detalji članka
Broj časopisa
Rubrika
Kada je rukopis prihvaćen za objavlјivanje, autori prenose autorska prava na izdavača. U slučaju da rukopis ne bude prihvaćen za štampu u časopisu, autori zadržavaju sva prava.
Na izdavača se prenose sledeća prava na rukopis, uklјučujući i dodatne materijale, i sve delove, izvode ili elemente rukopisa:
- pravo da reprodukuje i distribuira rukopis u štampanom obliku, uklјučujući i štampanje na zahtev;
- pravo na štampanje probnih primeraka, reprint i specijalnih izdanja rukopisa;
- pravo da rukopis prevede na druge jezike;
- pravo da rukopis reprodukuje koristeći fotomehanička ili slična sredstva, uklјučujući, ali ne ograničavajući se na fotokopiranje, i pravo da distribuira ove kopije;
- pravo da rukopis reprodukuje i distribuira elektronski ili optički koristeći sve nosioce podataka ili medija za pohranjivanje, a naročito u mašinski čitlјivoj/digitalizovanoj formi na nosačima podataka kao što su hard disk, CD-ROM, DVD, Blu-ray Disc (BD), mini disk, trake sa podacima, i pravo da reprodukuje i distribuira rukopis sa tih prenosnika podataka;
- pravo da sačuva rukopis u bazama podataka, uklјučujući i onlajn baze podataka, kao i pravo prenosa rukopisa u svim tehničkim sistemima i režimima;
- pravo da rukopis učini dostupnim javnosti ili zatvorenim grupama korisnika na osnovu pojedinačnih zahteva za upotrebu na monitoru ili drugim čitačima (uklјučujući i čitače elektonskih knjiga), i u štampanoj formi za korisnike, bilo putem interneta, onlajn servisa, ili putem internih ili eksternih mreža.
Kako citirati
Reference
E. Djordjević, S. Kabelac, Flow boiling of R-134a and ammonia in a plate heat exchanger, Int. J. Heat Mass Tran. 51 (2008) 6235–6242.
E. Djordjević, S. Kabelac, S. Šerbanović, Mean heat transfer coefficients during evaporation of 1,1,1,2-tetra-fluoroethane (R-134a) in a plate heat exchanger, J. Serb. Chem. Soc. 72 (2007) 833–846.
E. Živković, S. Kabelac, S. Šerbanović, Local heat transfer coefficients during evaporation of 1,1,1,2-tetrafluoro-ethane (R-134a) in a plate heat exchanger, J. Serb. Chem. Soc. 74 (2009) 427–440.
H. Martin, A theoretical approach to predict the performance of chevron-type plate heat exchangers, Chem. Eng. Process. 35 (1996) 301–310.
H. Martin, Druckverlust und Wärmeübergang in Plattenwärmeübertragern, in: VDI – Wärmeatlas, Springer Verlag, Heidelberg, 2002, pp. Mm1–Mm7.
H. Kumar, The plate heat exchanger: construction and design, in Proceedings of First UK National Conference on Heat Transfer, University of Leeds, Inst. Chem. Eng. Symp. Series No. 86, Leeds, UK, 1984, pp. 1275–1288.
R.K. Sinnott, Chemical Engineering Design, Coulson & Richardsons Chemical Engineering, Vol. 6, 4th ed., Elsevier Butterworth-Heinemann, Oxford, 2005.
S. Kakaç, H. Liu, Heat Exchangers: selection, rating and thermal design, 2nd ed., CRC Press, Boca Raton, FL, 2002.
T. Sun, A.S. Teja, Density, Viscosity, and Thermal Conductivity of Aqueous Ethylene, Diethylene, and Triethylene Glycol Mixtures between 290 K and 450 K, J. Chem. Eng. Data 48 (2003) 198–202.
C. Yang, P. Ma, F. Jing, D. Tang, Excess Molar Volumes, Viscosities, and Heat Capacities for the Mixtures of Ethylene Glycol + Water from 273.15 K to 353.15 K, J. Chem. Eng. Data 48 (2003) 836–840.